System Design
 

Cormeton Electronics Ltd are able to undertake all aspects of a systems design, from conventional to analogue addressable our team  are able to cover it all.

 

Call our Sales and Design department for more information on 01670 70 70 70

Standards Point The Way

Below is a list of system design classification standards

 

Category L1 The objective of a Category L1 system is to offer the earliest possible warning of fire, so as to achieve the longest available time for escape.

 

Category L2 The objective of a Category L2 system is identical to that of a Category L3 system, with the additional objective of affording early warning of fire in specified areas of high fire hazard or high fire risk.

 

Category L3 Designed to give a warning of fire at an early stage to enable all occupants, to escape safely, before the escape routes are impassable owing to the presence of fire, smoke or toxic gases. To achieve this objective it will normally be necessary to install detectors in rooms, which open onto an escape route.

 

Category L4 The objective of a category L4 system is to enhance the safety of occupants by providing warning of smoke within escape routes.

 

Category L5 The system in which the protected area is designed to satisfy the fire safety objective set out by the client’s representative.

 

Category P1 The objective of a category P1 system is to offer the earliest possible warning of fire so as to minimize the time between ignition and the arrival of fire fighters.

 

Category P2 The objective of a category P2 system is to provide early warning of fire in areas of high fire hazard level, or areas in which the risk to property or business continuity from fire is high.

 

Category M These systems are manually operated systems and therefore incorporate no automatic fire detectors.